SMC帶閥氣缸,SMC帶閥氣缸電子樣本
如果您對該產品感興趣的話,可以
產品名稱: SMC帶閥氣缸,SMC帶閥氣缸電子樣本
產品型號: CDJP2B6-15D?
產品展商: SMC
產品文檔: 無相關文檔
簡單介紹
SMC帶閥氣缸,SMC帶閥氣缸電子樣本
Operation type can be
changed to rod extended
when energized or rod
retracted when energized.
SMC帶閥氣缸,SMC帶閥氣缸電子樣本
SMC帶閥氣缸,SMC帶閥氣缸電子樣本
的詳細介紹
SMC帶閥氣缸,SMC帶閥氣缸電子樣本
##圓柱形氣缸上帶閥的氣缸。
##又一種速度控制閥內置的機種。
##速度易調整帶閥氣缸。
##帶磁性開關(CDVJ系列：CDVJ5、CDVJ3、
CDVM系列：CDVM5、CDVM5K、CDVM3、CDVM3K、
CDV3系列：CDV3、CDV3K、
CDVS1系列：CDVS1、CDVS1K)
SMC帶閥氣缸,SMC帶閥氣缸電子樣本
3. Install the solenoid valve and the plate, and tighten the small round
head screws, with a screw driver. After tightening, press the manual
button on the solenoid valve, check for any air leaks, and verify the
operating conditions. When the cylinder is viewed from above, the
position of the gasket is as shown in the figure below.
An auto switch cylinder with
the switch installed can also
be manufactured.
This procedure is for changing the rod extended when energized
to the rod retracted when energized.
1. Using a screwdriver, loosen the two small round head screws, and
remove the plate and the solenoid valve. At this time, instead of
removing the plate and the solenoid valve separately, remove them
together, with the round head screws remaining inserted.
SMC帶閥氣缸,SMC帶閥氣缸電子樣本
