概述SMC擺動氣缸,SMC擺動氣缸原理

概述SMC擺動氣缸,SMC擺動氣缸原理
Applicable to single vane type only
A special end is machined onto both the long and short shafts, and a through-hole is
drilled into both shafts. Female threads are machined into the through-holes, whose
diameter is equivalent to the diameter of the pilot holes.
? Not available for size 10.
? The maximum dimension L1 is, as
a rule, twice the thread size.
(Example) For M5: L1 max. = 10 mm
However, for M5 on the short shaft of T shaft
: L1 max. = 7.5 mm
? Applicable shaft types: K, T
? Equal dimensions are indicated by the same
marker.
磁性開關安裝位置可以移動到任意位置。
可直接安裝。
Dimension “L” of the actuators is provided in the
table below for JIS standard hexagon socket
head cap screws. If these types of screw are
used, their heads will fit in the mounting hole.

配管方向有缸體側面和軸向兩種。(帶有磁性開關和角度調整的配管方向只能選擇缸體側面)
低使用壓力：0.2MPa(缸徑10)0.15MPa(缸徑15～40)
帶角度調整的可以調整到任意角度。
附帶磁性開關(CDRB2系列：CDRB2□W、CDRB2□WU)
The short shaft can be further shortened by machining it
into a stepped round shaft with male threads.
(If shortening the shaft is not required, indicate “?” for dimension Y.)
? Applicable shaft type: W
? Equal dimensions are indicated by the same marker.
(If not specifying dimension C2, indicate “?” instead.)

概述SMC擺動氣缸,SMC擺動氣缸原理